Concrete Renew
|
A one-component, polymer-modified cementitious material for the resurfacing of existing concrete. It is
suitable for broom finishes and decorative trowel finishes on sidewalks, driveways, steps and anywhere that
has exposed concrete.
Data Sheet MSDS
|
Concrete Renew Fine
|
A one-component, polymer-modified cementitious material for the resurfacing of existing concrete. It allows a
variety of finishing options, including broom finishes and decorative trowel finishes, on sidewalks, driveways,
steps and anywhere that has exposed concrete. Concrete Renew Fine features a natural light gray color that
provides a uniform finish to concrete surfaces.
Data Sheet MSDS
|
Mapecem 101
|
A one-component, shrinkage-compensated, polymer-modified, cementitious mortar intended for the
renovation and topping of interior/exterior horizontal concrete surfaces. It is designed for factory floor repair,
loading docks, warehouse floors and other applications where severe wear resistance and abrasion
resistance are required.
Data Sheet MSDS
|
Mapecem 102
|
A one-component, shrinkage-compensated, polymer-modified, fast-setting cementitious mortar intended for
the renovation and topping of interior/exterior horizontal concrete surfaces. It is used for renovation of
horizontal concrete structures such as galleries, tunnels, bridges, overpasses, factory floors, warehouse
floors and loading docks; new and existing concrete slabs; and the construction of floating or monolithic
toppings where fast drying is required to allow traffic within 3 to 4 hours.
Data Sheet MSDS
|
Mapecem 202
|
A two-component, shrinkage-compensated, polymer-modified, fast-setting cementitious mortar intended for
the renovation and topping of interior/exterior horizontal concrete surfaces.
Data Sheet MSDS
|
Quick Patch
|
A versatile, fast-setting, cementitious material used for the patching of interior/exterior concrete surfaces
including concrete floors, driveways, sidewalks and concrete pads. Mapecem Quickpatch features
extraordinary ease of placement, with a variable water ratio and outstanding workability. Light gray Mapecem
Quickpatch can be applied from featheredge to 3” (7,5 cm) for ramping or filling.
Data Sheet MSDS
|
Ultraplan M20 Plus
|
An HCT™ (High-Hydrated Cement Technology)-based, quick-setting, self-leveling, self-drying material. It is
specially formulated for the resurfacing and construction of interior horizontal surfaces as a light-traffic
industrial or commercial wear topping or underlayment for floor coverings.
Data Sheet MSDS
|
Ultratop
|
An HCT™ (High-Hydrated Cement Technology)-based, self-leveling, self-drying topping that is specially
formulated for the resurfacing and construction of interior horizontal surfaces. Available in light gray and
white, Ultratop is used for fast-track resurfacing and construction of horizontal wear surfaces. The white
version is designed to maximize the brilliance of architectural stains, integral coloring agents, unique
additives, sealers and coatings. Ultratop provides the ultimate palette for designing unique and artistic floors
for retail stores, mall corridors and entrances, showroom floors, restaurant floors, hotel lobbies, loft
apartments … nearly anywhere a unique, creative floor is desired. Ultratop also is tough enough for industrial
warehouse floors and loading docks subject to continual vehicular and foot traffic.
Data Sheet MSDS
|
|
